我欠了前面的要補

Maker UNO最簡教學

先下載arduino

搜尋maker uno driver下載驅動

更改板子上的燈泡

[code]

void setup() {

  // put your setup code here, to run once:

  pinMode(13,OUTPUT);

  digitalWrite(13,HIGH);

}

void loop() {

  // put your main code here, to run repeatedly:

}

[/code]

變回原廠

#define NOTE_C5 523
#define NOTE_D5 587
#define NOTE_E5 659
#define NOTE_F5 698
#define NOTE_G5 784

#define BUTTON 2
#define BUZZER 8
/*
int melody[] = {
  NOTE_E5, NOTE_E5, 0, NOTE_E5, 0, NOTE_C5, NOTE_E5, 0, NOTE_G5
};*/
int melody[] = {
  NOTE_G5,NOTE_E5, NOTE_E5, NOTE_F5,NOTE_D5,NOTE_D5,NOTE_C5, NOTE_D5,NOTE_E5,NOTE_F5,NOTE_G5,NOTE_G5,NOTE_G5
};

int noteDurations[] = {
  10, 10, 10, 10, 10, 10, 10, 10, 10
};

int pin;
int ledArrayHigh;
int ledArrayLow;
boolean mode = false;
boolean buttonPressed = false;

void setup()
{
  delay(1000);
 
  pinMode(BUTTON, INPUT_PULLUP);
  for (pin = 3; pin < 14; pin++) {
    pinMode(pin, OUTPUT);
  }

  for (int thisNote = 0; thisNote < 13; thisNote++) {
    int noteDuration = 1000 / noteDurations[thisNote];
    tone(BUZZER, melody[thisNote], noteDuration);
    int pauseBetweenNotes = noteDuration * 1.30;
    delay(pauseBetweenNotes);
    noTone(BUZZER);
  }
}

void loop()
{
  for (pin = 0; pin < 5; pin++) {
    if (digitalRead(BUTTON) == LOW &&
        buttonPressed == false) {
      buttonPressed = true;
      mode = !mode;
      pin = 0;
      if (mode == false) {
        tone(BUZZER, NOTE_C5, 100);
        delay(100);
        tone(BUZZER, NOTE_G5, 100);
        delay(100);
        noTone(BUZZER);
      }
      else if (mode == true) {
        tone(BUZZER, NOTE_G5, 100);
        delay(100);
        tone(BUZZER, NOTE_C5, 100);
        delay(100);
        noTone(BUZZER);
      }
    }

    if (mode == false) {
      ledArrayHigh = 13 - pin;
      ledArrayLow = 7 - pin;
    }
    else if (mode == true) {
      ledArrayHigh = 9 + pin;
      ledArrayLow = 3 + pin;
    }
    digitalWrite(ledArrayHigh, HIGH);
    digitalWrite(ledArrayLow, HIGH);
    delay(100);
    digitalWrite(ledArrayHigh, LOW);
    digitalWrite(ledArrayLow, LOW);
    if (pin == 4) delay(100);
  }

  if (buttonPressed == true) {
    buttonPressed = false;
  }

}

音樂

#define NOTE_C5 523
#define NOTE_D5 587
#define NOTE_E5 659
#define NOTE_F5 698
#define NOTE_G5 784

#define BUZZER 8

void setup() {
  // put your setup code here, to run once:
  pinMode(BUZZER,OUTPUT);
  pinMode(2 ,INPUT_PULLUP);
}
bool a = false;
void loop() {
  // put your main code here, to run repeatedly:
  if(digitalRead(2) == HIGH) a = false;
  else a = true;
  if(a){
    tone(BUZZER,NOTE_G5,230);
    delay(430);
    tone(BUZZER,NOTE_E5,230);
    delay(430);
    tone(BUZZER,NOTE_E5,230);
    delay(430);
    tone(BUZZER,NOTE_F5,230);
    delay(430);
    tone(BUZZER,NOTE_D5,230);
    delay(430);
    tone(BUZZER,NOTE_D5,230);
    delay(430);
    tone(BUZZER,NOTE_C5,230);
    delay(430);
    tone(BUZZER,NOTE_D5,230);
    delay(430);
    tone(BUZZER,NOTE_E5,230);
    delay(430);
    tone(BUZZER,NOTE_F5,230);
    delay(430);
    tone(BUZZER,NOTE_G5,230);
    delay(430);
    tone(BUZZER,NOTE_G5,230);
    delay(430);
    tone(BUZZER,NOTE_G5,230);
    delay(430);
  }

}

互相連結

Arduino

#define NOTE_C5 523
#define NOTE_D5 587
#define NOTE_E5 659
#define NOTE_F5 698
#define NOTE_G5 784
void setup() {
  // put your setup code here, to run once:
  pinMode(8,OUTPUT);
  Serial.begin(9600);
}

void loop() {
  // put your main code here, to run repeatedly:
  if(Serial.available()){
    char now = Serial.read();
    if(now =='1')tone(8,NOTE_C5,300);
    if(now =='2')tone(8,NOTE_D5,300);
    if(now =='3')tone(8,NOTE_E5,300);
    if(now =='4')tone(8,NOTE_F5,300);
    if(now =='5')tone(8,NOTE_G5,300);
  }
}

Processing

import processing.serial.*;
Serial myPort;
void setup(){
  myPort = new Serial(this,"COM3",9600);
 
}
void draw(){
 
}
void keyPressed(){
  if(key =='1') myPort.write('1');
  if(key =='2') myPort.write('2');
  if(key =='3') myPort.write('3');
  if(key =='4') myPort.write('4');
  if(key =='5') myPort.write('5');
 
}