Week11

第八堂課

Arduino maker uno程式基本操作一(發亮)

程式

void setup() {
  // put your setup code here, to run once:
  pinMode(13,OUTPUT);
  digitalWrite(13,HIGH);
}
void loop() {
  // put your main code here, to run repeatedly:
}

Arduino maker uno程式基本操作二(還原)

程式

#define NOTE_C5 523

#define NOTE_E5 659

#define NOTE_G5 784

#define BUTTON 2

#define BUZZER 8

int melody[] = {

  NOTE_E5, NOTE_E5, 0, NOTE_E5, 0, NOTE_C5, NOTE_E5, 0, NOTE_G5

};

int noteDurations[] = {

  10, 10, 10, 10, 10, 10, 10, 10, 10

};

int pin;

int ledArrayHigh;

int ledArrayLow;

boolean mode = false;

boolean buttonPressed = false;

void setup()

{

  delay(1000);

  

  pinMode(BUTTON, INPUT_PULLUP);

  for (pin = 3; pin < 14; pin++) { 

    pinMode(pin, OUTPUT);

  }

  for (int thisNote = 0; thisNote < 9; thisNote++) {

    int noteDuration = 1000 / noteDurations[thisNote];

    tone(BUZZER, melody[thisNote], noteDuration);

    int pauseBetweenNotes = noteDuration * 1.30;

    delay(pauseBetweenNotes);

    noTone(BUZZER);

  }

}

void loop()

{

  for (pin = 0; pin < 5; pin++) {

    if (digitalRead(BUTTON) == LOW &&

        buttonPressed == false) {

      buttonPressed = true;

      mode = !mode;

      pin = 0;

      if (mode == false) {

        tone(BUZZER, NOTE_C5, 100);

        delay(100);

        tone(BUZZER, NOTE_G5, 100);

        delay(100);

        noTone(BUZZER);

      }

      else if (mode == true) {

        tone(BUZZER, NOTE_G5, 100);

        delay(100);

        tone(BUZZER, NOTE_C5, 100);

        delay(100);

        noTone(BUZZER);

      }

    }

    if (mode == false) {

      ledArrayHigh = 13 - pin;

      ledArrayLow = 7 - pin;

    }

    else if (mode == true) {

      ledArrayHigh = 9 + pin;

      ledArrayLow = 3 + pin;

    }

    digitalWrite(ledArrayHigh, HIGH);

    digitalWrite(ledArrayLow, HIGH);

    delay(100);

    digitalWrite(ledArrayHigh, LOW);

    digitalWrite(ledArrayLow, LOW);

    if (pin == 4) delay(100);

  }

  if (buttonPressed == true) {

    buttonPressed = false;

  }

}

Arduino maker uno程式基本操作三(按鈕)

程式

void setup() {

 pinMode(2,INPUT_PULLUP);//2號輸出改進入端,PULLUP為初期設為HIGF

 for(int i=3;i<=13;i++){

  pinMode(i,OUTPUT);

 }

}

bool aLightHigh=true;

void loop() {

  if(digitalRead(2)==HIGH)aLightHigh=true;

  else aLightHigh=false;

  for(int i=3;i<=13;i++){

    if(aLightHigh) digitalWrite(i,HIGH);

    else digitalWrite(i,LOW);

  }

}

Arduino maker uno程式基本操作四(作曲)

程式

#define NOTE_C5 523
#define NOTE_D5 587
#define NOTE_E5 659
#define NOTE_F5 698
#define NOTE_G5 784
void setup() {
  pinMode(8,OUTPUT);
}
void loop() {
 tone(8,NOTE_G5,250);
 delay(250);
 tone(8,NOTE_E5,250);
 delay(250);
 tone(8,NOTE_E5,250);
 delay(250);
 tone(8,NOTE_F5,250);
 delay(250);
 tone(8,NOTE_D5,250);
 delay(250);
 tone(8,NOTE_D5,250);
 delay(250);
 tone(8,NOTE_C5,250);
 delay(250);
 tone(8,NOTE_D5,250);
 delay(250);
 tone(8,NOTE_E5,250);
 delay(250);
 tone(8,NOTE_F5,250);
 delay(250);
 tone(8,NOTE_G5,250);
 delay(250);
 tone(8,NOTE_G5,250);
 delay(250);
 tone(8,NOTE_G5,250);
 delay(250);
}

Arduino maker uno及Processing程式基本組合(鋼琴按鈕)

程式(Arduino)

#define NOTE_C5 523

#define NOTE_D5 587

#define NOTE_E5 659

#define NOTE_F5 698

#define NOTE_G5 784

void setup() {

 for(int i=3;i<=13;i++){

 pinMode(i,OUTPUT);

 }

 pinMode(8,OUTPUT);

 Serial.begin(9600);

}

void loop() {

  if(Serial.available()){

    char now = Serial.read();

    if (now=='1') tone(8,NOTE_C5,300);

    if (now=='1') digitalWrite(3,HIGH);

    delay(10);

    if (now=='1') digitalWrite(3,LOW);

    if (now=='2') tone(8,NOTE_D5,300);

    if (now=='2') digitalWrite(4,HIGH);

    delay(10);

    if (now=='2') digitalWrite(4,LOW);

    if (now=='3') tone(8,NOTE_E5,300);

    if (now=='3') digitalWrite(5,HIGH);

    delay(10);

    if (now=='3') digitalWrite(5,LOW);

    if (now=='4') tone(8,NOTE_F5,300);

    if (now=='4') digitalWrite(6,HIGH);

    delay(10);

    if (now=='4') digitalWrite(6,LOW);

    if (now=='5') tone(8,NOTE_G5,300);

    if (now=='5') digitalWrite(7,HIGH);

    delay(10);

    if (now=='5') digitalWrite(7,LOW);

  }

}

程式(Processing)

import processing.serial.*;

Serial myPort;

void setup() {

  myPort = new Serial(this,"COM4",9600);

}

void draw(){

  

}

void keyPressed(){

  if(key=='1') myPort.write('1');

  if(key=='2') myPort.write('2');

  if(key=='3') myPort.write('3');

  if(key=='4') myPort.write('4');

  if(key=='5') myPort.write('5');

}