week11_寶欸學習筆記

1.接上USB線，下載小葉老師雲端硬碟得驅動程式
2.開啟arduino
3.貼上以下程式碼
void setup() {
  // put your setup code here, to run once:
  pinMode(13,OUTPUT);
  digitalWrite(13,HIGH);
}

void loop() {
  // put your main code here, to run repeatedly:

}
讓第13顆燈泡恆亮



4.開新檔案貼上馬力歐程式碼再儲存執行聽到馬力歐音樂代表刷機完成
#define NOTE_C5 523
#define NOTE_E5 659
#define NOTE_G5 784

#define BUTTON 2
#define BUZZER 8

int melody[] = {
  NOTE_E5, NOTE_E5, 0, NOTE_E5, 0, NOTE_C5, NOTE_E5, 0, NOTE_G5
};

int noteDurations[] = {
  10, 10, 10, 10, 10, 10, 10, 10, 10
};

int pin;
int ledArrayHigh;
int ledArrayLow;
boolean mode = false;
boolean buttonPressed = false;

void setup()
{
  delay(1000);
 
  pinMode(BUTTON, INPUT_PULLUP);
  for (pin = 3; pin < 14; pin++) {
    pinMode(pin, OUTPUT);
  }

  for (int thisNote = 0; thisNote < 9; thisNote++) {
    int noteDuration = 1000 / noteDurations[thisNote];
    tone(BUZZER, melody[thisNote], noteDuration);
    int pauseBetweenNotes = noteDuration * 1.30;
    delay(pauseBetweenNotes);
    noTone(BUZZER);
  }
}

void loop()
{
  for (pin = 0; pin < 5; pin++) {
    if (digitalRead(BUTTON) == LOW &&
        buttonPressed == false) {
      buttonPressed = true;
      mode = !mode;
      pin = 0;
      if (mode == false) {
        tone(BUZZER, NOTE_C5, 100);
        delay(100);
        tone(BUZZER, NOTE_G5, 100);
        delay(100);
        noTone(BUZZER);
      }
      else if (mode == true) {
        tone(BUZZER, NOTE_G5, 100);
        delay(100);
        tone(BUZZER, NOTE_C5, 100);
        delay(100);
        noTone(BUZZER);
      }
    }

    if (mode == false) {
      ledArrayHigh = 13 - pin;
      ledArrayLow = 7 - pin;
    }
    else if (mode == true) {
      ledArrayHigh = 9 + pin;
      ledArrayLow = 3 + pin;
    }
    digitalWrite(ledArrayHigh, HIGH);
    digitalWrite(ledArrayLow, HIGH);
    delay(100);
    digitalWrite(ledArrayHigh, LOW);
    digitalWrite(ledArrayLow, LOW);
    if (pin == 4) delay(100);
  }

  if (buttonPressed == true) {
    buttonPressed = false;
  }
}
5.改成小蜜蜂
#define NOTE_C5 523
#define NOTE_D5 587
#define NOTE_E5 659
#define NOTE_F5 698
#define NOTE_G5 784
#define NOTE_A5 880
#define NOTE_B5 987

#define BUTTON 2
#define BUZZER 8

int melody[] = {
  NOTE_G5, NOTE_E5, NOTE_E5,0,
#define NOTE_C5 523
#define NOTE_D5 587
#define NOTE_E5 659
#define NOTE_F5 698
#define NOTE_G5 784
#define NOTE_A5 880
#define NOTE_B5 987

#define BUTTON 2
#define BUZZER 8

int melody[] = {
  NOTE_G5, NOTE_E5, NOTE_E5,0,
  NOTE_F5, NOTE_D5, NOTE_D5, 0,
  NOTE_C5, NOTE_D5,NOTE_E5, NOTE_F5,NOTE_G5,NOTE_G5,NOTE_G5,0,
  NOTE_G5, NOTE_E5, NOTE_E5,0,
  NOTE_F5, NOTE_D5, NOTE_D5, 0,
  NOTE_C5, NOTE_E5,NOTE_G5, NOTE_G5,NOTE_C5
};

int noteDurations[] = {
  10, 10, 10, 10, 10,
  10, 10, 10, 10, 10,
  10, 10, 10, 10, 10,
  10, 10, 10, 10, 10,
  10, 10, 10, 10, 10,
  10, 10, 10, 10
};

int pin;
int ledArrayHigh;
int ledArrayLow;
boolean mode = false;
boolean buttonPressed = false;

void setup()
{
  delay(1000);
 
  pinMode(BUTTON, INPUT_PULLUP);
  for (pin = 3; pin < 28; pin++) {
    pinMode(pin, OUTPUT);
  }

  for (int thisNote = 0; thisNote < 29; thisNote++) {
    int noteDuration = 1000 / noteDurations[thisNote];
    tone(BUZZER, melody[thisNote], noteDuration);
    int pauseBetweenNotes = noteDuration * 1.30;
    delay(pauseBetweenNotes);
    noTone(BUZZER);
  }
}

void loop()
{
  for (pin = 0; pin < 5; pin++) {
    if (digitalRead(BUTTON) == LOW &&
        buttonPressed == false) {
      buttonPressed = true;
      mode = !mode;
      pin = 0;
      if (mode == false) {
        tone(BUZZER, NOTE_C5, 100);
        delay(100);
        tone(BUZZER, NOTE_G5, 100);
        delay(100);
        noTone(BUZZER);
      }
      else if (mode == true) {
        tone(BUZZER, NOTE_G5, 100);
        delay(100);
        tone(BUZZER, NOTE_C5, 100);
        delay(100);
        noTone(BUZZER);
      }
    }

    if (mode == false) {
      ledArrayHigh = 13 - pin;
      ledArrayLow = 7 - pin;
    }
    else if (mode == true) {
      ledArrayHigh = 9 + pin;
      ledArrayLow = 3 + pin;
    }
    digitalWrite(ledArrayHigh, HIGH);
    digitalWrite(ledArrayLow, HIGH);
    delay(100);
    digitalWrite(ledArrayHigh, LOW);
    digitalWrite(ledArrayLow, LOW);
    if (pin == 4) delay(100);
  }

  if (buttonPressed == true) {
    buttonPressed = false;
  }
}
6.把P語言跟Arduino連線

P語言:

import processing.serial.*;
Serial myPort;
void setup(){
  myPort = new Serial(this,"COM4",9600);
  
}
void draw(){
  
}
void keyPressed(){
  if(key=='1') myPort.write('1');
  if(key=='2') myPort.write('2');
  if(key=='3') myPort.write('3');
  if(key=='4') myPort.write('4');
  if(key=='5') myPort.write('5');
}

Arduino:
#define NOTE_C5 523
#define NOTE_D5 587
#define NOTE_E5 659
#define NOTE_F5 698
#define NOTE_G5 784
void setup() {
  pinMode(8,OUTPUT);
  Serial.begin(9600);

}

void loop() {
  if(Serial.available()){
    char now = Serial.read();
    if(now=='1') tone(8,NOTE_C5,300);
    if(now=='2') tone(8,NOTE_D5,300);
    if(now=='3') tone(8,NOTE_E5,300);
    if(now=='4') tone(8,NOTE_F5,300);
    if(now=='5') tone(8,NOTE_G5,300);
    }

}
執行P語言按按鍵